A jump starter: benefits and useful tips

A jump starter makes a car owner’s life much easier. You will need no assistance from other people with this tool. Don’t forget to stick a jump starter to a vehicle battery and to run a means of transportation. That's why it is a big deal to choose a high-quality jump starter, so I recommend checking the bestfordriver.com and preferring the lithium-ion device that has a high density of accumulated energy and discharge currents. 

Moreover, it can propose a possibility of long-term storage in difficult conditions and a substantial supply of discharge (more than 1000 charge cycles). The mentioned starters have a very low weight and can be moved easily. These units can become the best investment object that is able to save a car owner from the need to waste money on a tow. The car’s battery can replenish energy with help of a jump starter and another car.

How to jump-start a car with the cables help?

  1. You should place both vehicles not very close to each other and turn them off.
  2. Protect your face with a special mask.
  3. Join the positive jumper cable and the positive terminal of a discharged battery.
  4. Compound the other end of the positive line to the positive battery terminal on the car granting the jump.
  5. Plug the negative feeder to the negative terminal on the auto supporting the jump.
  6. Put through the other end of the negative wire to a prone metal part of the car with the discharged battery.
  7. Assure yourself that cables remain far from the moving engine components.
  8. Let the engine to idle for several minutes.
  9. You can remove the mask.
  10. Start the vehicle.
  11. If it works, let the car run for 20 minutes, and if it doesn’t – check the cable connections.
  12. Don’t allow keeping the jumper cable close to any metal. Start feeder’s vice versa removing.

The manufacturer’s instruction can also bring you some useful information. If all these steps appeared to be not very productive, call the experts. It’s better to renew an old and non-working detail than to reanimate it and waste money.

How to start a car without cables?

If you have a classic transmission car, follow the further steps:

  1. Hardly press the clutch and put the vehicle in a first gear.
  2. Switch the ignition on.
  3. Remove your foot from the brake and start rolling down the street, leaving the clutch totally pressed.
  4. Ride up during 10-20 minutes.
  5. The clutch releasing should be quick. Feel that the engine turns and starts. If such a procedure didn’t bring the desired effect, repeat it.

Follow the instructions clearly, watch your own safety, and you will see the result!

About the Author Long Le

Leave a Comment: